CADPAK PL

MIL PRF 131 CLASS 1

MILITARY SPECIFICATION
FILM: MIL PRF 131 C1
POUCH: MIL DTL 117 T1 CE S1
Exterior: 90ga OPP
Recommended Sealing Conditions:
Temperature 400 °F | Pressure 40 PSI | Dwell 1 SEC

 

Barrier Material: Water vapor proof, Greaseproof, Flexible, Heat Sealable, Class 1

Application:

Cadpak PL is a light duty Foil Barrier film used where very low oxygen and moisture levels are required. It is silver in color with red Mil Spec printing. It is used extensively in military applications where a cost-effective, light duty, high barrier material is required. Typical uses are vacuum crating and pouches for moisture/oxygen sensitive items. Product protection inside export crating is another common application for this film.

Converting:

Cadpak PL can be converted in many ways: 2-seal pouch, 3-seal pouch, side gusset, stand up pouch and tubing. Features include: recloseable zipper, tear notch, round hang hole, and sombrero hang hole.

Physical Properties:

PROPERTIES TEST METHOD UNIT OF MEASURE TYPICAL VALUE
Caliper ASTM D2103 mils 3.2
Yield (Nominal) Calculated in²/lb 8190
MVTR ASTM F1249 g/100 in²/day @90% RH 40 °C .0005
OTR ASTM D3985 cc/100 in²/day @0% RH, 23 °C .0005
Puncture MIL STD 3010 lbs 18
Tensile Strength ASTM D882 lbs/inch 20
Breaking Strength MIL STD 3010 lbs/ (grab method) 70
Seal Strength ASTM F88 lbs/in 10

The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.

© Copyright - Military Bags