FR5500
MIL PRF 22191 T2
MILITARY SPECIFICATION
FILM: MIL PRF 22191 T2
POUCH: MIL DTL 117 T2 CC S2
Exterior: 48ga PET
Recommended Sealing Conditions:
Temperature 350 °F | Pressure 40 PSI | Dwell 1 SEC
Physical Description
Laminated PET/LLDPE
Application:
This clear mil spec film has moderate oxygen and moisture vapor transition rates. The Polyester layer makes this film non-extensible while the Poly layer enables it to be heat-sealable. The film does not stretch and tears nicely at the tear notch. The film has blue lettering on it denoting the manufacturer and military specification. This film is also available without the mil specification (clear – no lettering) for non-military applications
Converting:
Film is usually converted into sheeting, tubing, 2-seal pouches, and 3-seal pouches.
Physical Properties:
| PROPERTIES | TEST METHOD | UNIT OF MEASURE | TYPICAL VALUE |
| Caliper | mils | 3.0 | |
| Yield | sq.in/lb | 9113 | |
| MVTR | Mocon | gms/100² in./24 hrs | .03 |
| OTR | ATTM-11434-66 | CC/100² in./24 hrs | 9.0 |
| Burst | Mullen | Psi | 50 |
| Tensile MD | ASTM D882 | Lbs. at break | 18 |
| Tear MD | ASTM 689 | Lbs at break | 50 |
| Tear XMD | ASTM 689 | Lbs at break | 50 |
The values indicated in this document are the results of tests made in compliance with the normal standards. They are given as an indication and should be considered as average values and given without any obligation on our part. This data was provided directly to Shannon from our film supplier.
